B&T Print-X VERS36 .36 Cal Modular Suppressor - Black Titanium

B&T Print-X VERS36 .36 Cal Modular Suppressor - Black Titanium

Cover nearly every host with one suppressor with the B&T VERS36-XM in black. This 3D-printed, all-titanium modular suppressor is rated up to .360 caliber, so it works on pistols, subguns, carbines, and rifles, from 9mm and 5.56 up to .308 and .300 Win Mag. B&T calls the VERS36 the lightest, strongest, and most versatile suppressor in its class, and it weighs between 7.4 and 11.3 ounces depending on how you configure it.

B&T builds the VERS36 from 100% titanium using laser bed fusion, with a Reduced Back Pressure System design that helps limit blowback and gas to the shooter. The modular design lets you change the suppressor's length and end cap for the firearm and caliber you are shooting, so you can run it short and light on a carbine or longer for more sound reduction on a rifle. The durable black finish gives it a clean, low-profile look on any rifle, and it measures 1.7 inches in diameter.

It uses a HUB interface, so it is compatible with a range of mounts and front caps, and 1/2x28 and 5/8x24 direct thread mounts are available for it. B&T also offers separate end caps in M33x1 for .360, 5.56, and 7.62mm use, so you can tune the suppressor to each caliber. Confirm which adapters and end caps are in the box with your suppressor, and ask us about any you need to add. You can use one suppressor across several firearms instead of buying a separate one for each caliber.

Suppressors can be transferred with a standard firearm background approval (Form 4473). Explore our full lineup of NFA items and suppressors at https://www.nativeoutdoors.com/suppressors, or stop by the store — our staff can walk you through whichever purchase and transfer process applies to your situation.

Frequently Asked Questions

Q: What calibers can the B&T VERS36-XM suppress?
A: It is rated up to .360 caliber, which covers pistol calibers like 9mm and rifle calibers like 5.56, .308, and .300 Win Mag. Use the correct end cap for your caliber.

Q: How does it mount to my firearm?
A: It uses a HUB interface, so it works with compatible mounts and front caps. Direct thread mounts are available in 1/2x28 and 5/8x24.

Q: Is the suppressor modular?
A: Yes. You can change the end cap and configure the length for the firearm and caliber you are shooting, which lets one suppressor serve several hosts.

Q: How big and heavy is it?
A: It is 1.7 inches in diameter, and it ranges from about 4.9 to 6.9 inches long and from 7.4 to 11.3 ounces depending on how it is configured.

Q: What is it made of?
A: It is made entirely from 3D-printed titanium using laser bed fusion, with a black finish.

Q: How do I buy a suppressor?
A: Suppressors can be transferred with a standard firearm background approval (Form 4473), subject to your state's laws. Stop by the store, and our staff will walk you through the process.