Rings/Bases

Burris Optics AR PEPR Riflescope Mount. Lightweight aluminum with anodized black finish. 1.34" height.  For 34mm Main Tubes Optimized for AR Firearms Forward Positioning up to 2" Allows full use of eye relief Two Picatinny mount points on top Compatible with Picatinny rails Quick-release locking screws         ..

DNZ's Hunt Masters two piece scope mounts are custom made to fit each type of firearm and align perfectly with your rifle's receiver. Each ring and base is machined from top-grade aluminum, which absorbs shock and withstands temperature extremes at a fraction of the weight. The Hunter Masters uses a internal ring and base design which allows for extra eye relief adjustment and has up to four times the threads of other mounts for absolute strength and security. This model is compatible with Remin..

Model 1894,1895, 336 and XLR One inch scope tube Black Finish Medium Mount 8-40 receiver threads Rings are .625" wide Dimension from outside of back ring to outside of front ring is 4.09" From the bottom of the mount to the centerline of the scope tube is 1.062  ..

Add the versatility of a 1 piece scope mount to your rifle without having to drilled to fit factory scope mount holes, no drilling or tapping required. 0 MOA elevation Howa 1500 / Weatherby Vanguard SA ..

Add the versatility of a 1 piece scope mount to your rifle without having to drilled to fit factory scope mount holes, no drilling or tapping required. 20 MOA elevation Howa 1500 / Weatherby Vanguard SA ..

BackCountry cross-slot bases are machined from 7075-T6 aircraft-grade aluminum for lightweight, rugged performance. Fits both Picatinny and Weaver-style rings. Zero Elevation. Fits Remington 700 Bolt-action Rifles. ..

BackCountry cross-slot bases are machined from 7075-T6 aircraft-grade aluminum for lightweight, rugged performance. Fits both Picatinny and Weaver-style rings. Available with zero elevation or 20-MOA for long-range shooting. Fits Remington 700 Bolt-action Rifles. ..

When ounces matter as much as performance, this is the mount you need. The one-piece design makes installation straightforward and simple. Machined from a single piece of lightweight, 7075-T6 aircraft-grade aluminum for a lifetime of lightweight, rugged performance. This model will fit a Remington 700, has 30mm high rings, and a reversible front base. Series Ring/Base Combo Type 2-Piece Base / Rings Finish Black Matte Material Aluminum Rings Included Yes Misc 30mm Ring Piece..

One piece IMS mount for 30mm Rifle Scopes. Extremely durable lightweight aircraft aluminum. Perfect height and eye relief for AR Flattop rifles. 4 screws for each ring top that seat into steel inserts. This model has a 20MOA cant built into the mount for long range shooting. A perfect mount for a .308 AR. 8oz 1.4" height 30 mm  ..

* STD 2-Piece bases fit right- and left-hand actions * STD rings are made to match up with STD 1-Piece 2-Piece bases * Forward part of the base accepts a dovetail ring locking it solidly into position * Long Range STD mounts provide a 1/4 degree (15-MOA) slope of built-in elevation * STD 2-Piece bases offer maximum accessibility to the breech area of your rifle * Five different ring heights are available for STD bases * Rear ring is secured by windage adjustment screws * Versatile available for ..

 STD 2-Piece bases fit right- and left-hand actions  STD rings are made to match up with STD 1-Piece 2-Piece bases  Forward part of the base accepts a dovetail ring locking it solidly into position  Long Range STD mounts provide a 1/4 degree (15-MOA) slope of built-in elevation  STD 2-Piece bases offer maximum accessibility to the breech area of your rifle  Five different ring heights are available for STD bases  Rear ring is secured by windage adjustment screws  Versatile available for m..

* STD 2-Piece bases fit right- and left-hand actions * STD rings are made to match up with STD 1-Piece 2-Piece bases * Forward part of the base accepts a dovetail ring locking it solidly into position * Long Range STD mounts provide a 1/4 degree (15-MOA) slope of built-in elevation * STD 2-Piece bases offer maximum accessibility to the breech area of your rifle * Five different ring heights are available for STD bases * Rear ring is secured by windage adjustment screws * Versatile available for ..

Fit your Nikko Stirling scope to your Howa rifle with this 1 piece base for short action rifles. 0 MOA elevation Howa 1500 / Weatherby Vanguard SA ..

High rings fit most 1-inch tube riflescopes with 42-52mm objectives Strong, Lightweight Aluminum Alloy Construction with Matte Black Finish Fits all Weaver/Warne/Picatinny-style Bases ..

Low rings fit most 1-inch tube riflescopes with 20-36mm objectives Strong, Lightweight Aluminum Alloy Construction with Matte Black Finish Fits all Weaver/Warne/Picatinny-style Bases ..

Medium rings fit most 1-inch tube riflescopes with 36-42mm objectives Strong, Lightweight Aluminum Alloy Construction with Matte Black Finish Fits all Weaver/Warne/Picatinny-style Bases ..

Nikon's A-Series Scope Rings are made of durable aluminum alloy with a black matte finish. They are securely mounted to your rifle as they are clamped together locking in your scope. Model: A-Series Material: Aluminum Finish: Black Matte Size: 30mm Height: High   ..

Nikon's A-Series Scope Rings are made of durable aluminum alloy with a black matte finish. They are securely mounted to your rifle as they are clamped together locking in your scope. Model: A-Series Material: Aluminum Finish: Black Matte Size: 30mm Height: Medium   ..

Tikka Optilock ring mounts are precisely machined out of solid steel to ensure perfect mating with our integral receiver tapered scope mount rails and optimal scope alignment. Optilock ring mounts come packed in pairs all tools for assembly included in the box. Mount rings feature a patented spherical fastening ring which makes scope mounting considerably easier. This protective sleeve also ensures that the scope body will not be scratched or damaged during mounting. 30mm Medium Blued ..

Mounts to Picatinny-style or Weaver-style rails CNC-machined construction Reversible one-piece base Integrated recoil lug Centerline is approximately 1.5" above mounting rail Length 2 7/8” Base For 30mm Scope Tubes ..