Bow Cases

Deluxe compound bow case with 9 different pockets for archery gear and a shoulder strap made by Allen. Pocketing includes external arrow pocket and internal straps to secure your bow. 41" x 19" x 2" ..

Fits bows up to 35″ axle to axle, dense foam padding,  rugged Endura fabric construction,  snag-resistant lining.  ..

The Hemlock Compound bow case by Allen features an arrow pocket and accessory pocket. It also comes with camo accents and a shoulder strap. Case Dimensions: 41 Inches Wide x 18 Inches High x 3 Inches Deep Mossy Oak Country Camouflage Interior Cavity Lined with Soft Brushed Tricot to Protect your Bow ..

1 1/2" total soft padding Full-length heavy-duty zipper with pull Soft scratch-resistant inner lining Attractive 3D Camo panels Durable, extra heavy-duty Nylon, water-resistant outer shell ..

Made of luggage-grade plastic the Arrow-Plus case is uniquely styled for several uses. It has the capacity for 36+ arrows (up to 35" total length arrows) or 18 arrows and an average-sized quiver. In addition this arrow case can hold two removable sights by their sight bars. It was desiged for the older removal sight bars and may not be able to hold the more modern removal sights. Four large compartments are designed to hold wrist guards tabs stabilizers scents foot steps range finders etc. Addit..

Designed to store and protect smaller sized bows Includes pillar lock system protecting the case from being crushed interior includes tie-down bow straps Arrow holders and high-density foam. Molded Handle. 41" x 15" x 4.75" 6 lbs. ..

The 4217 Double Bow Case offers the maximum in protection for two of the wider parallel limb bows with a rigid foam bunk-bed system for protection and stable positioning and convoluted foam in the lid for secure positioning and cushioning of your gear. The MIL-STD Injection Molded Parallel Limb Bow case has a uni-body design, which eliminates the need for excessive metal reinforcing hardware found on traditional flight cases. The iSeries injection molded waterproof cases are constructed of ul..

Removable camo wrap for your case.  (Case not included) Fits model SKB 3i-4217   ..

Removable camo wrap for your case.  (Case not included) Fits model SKB 3i-5014   ..

The Hunter Series Bow Case features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. "SKB's Perfect-Match" valance bending system provides a tight and secure fit to prevent dirt dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle and weighs eleven pounds. The interior cavity dimensions of theHunter Series Bow Case are: 39" long ..

If you are the bowhunter who likes to keep all your broadheads in place this is the box for you! Conforming to the shape of each individual broadhead you can hold over 20 broadheads securely in place by two special foam inserts. It comes with a transluscent box for storing smaller items that you also need to keep in organized such as blades nocks and points. ..

The Hunter Series Bow Case features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. "SKB's Perfect-Match" valance bending system provides a tight and secure fit to prevent dirt dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle and weighs eleven pounds. The interior cavity dimensions of the 2SKB-4117 Hunter Series Bow Case are 39"..

Offering maximum protection for Parallel Limb Bows, this case features a custom foam insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. In-line skate style wheels for easy transport. Trigger release latches can be retrofitted with TSA accepted key locking latches. Padlock holes include stainless steel padlock protector clips. Layered foam for padded protection. Cushion grip han..

Designed to fit into a soft bow case pocket the Compact Arrow Case holds 18 to 24 full length arrows with broadheads (which are held in place by foam). The case is held shut with MTM's snap-lock latch system. Hinges are made of stainless steel. Two padlock tabs are provided for security. Made with luggage grade polypropylene for longevity. Dimensions: 36.25" x 7.5" x 3" For Arrows up to 35.75" total length ..

The 3i-5014 Double Bow Case features a bunk-bed storage system with rigid foam dividers for storing/transporting two bows or a rifle and a bow. Bunk-bed storage system with rigid foam dividers. In-line skate style wheels for easy transport. Trigger release latches can be retrofitted with TSA accepted key locking latches. Padlock holes include stainless steel padlock protector clips. Cushion grip handles on three sides for comfortable lifting and carrying. Waterproof and dust tigh..

The Pro Series Small Single Bow Case fits parallel limb bows up to 35" and features lid storage for a dozen arrows and up to 3 accessory boxes. (sold separately). The 3I-3614-6G-PS is injection molded to be both lighter and stronger than the competition, and features waterproof construction, a unique custom grey color, TSA accepted locking trigger latches, and custom red snap down rubber molded cushion grip handle for convenient carrying.  The 3I-3614-6G-PS Pro-Series Small Single Bow Case..

The 3I-4214-5G-PS Pro-Series Single Bow Case is injection molded from ultra high-strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design, meeting military standard MIL-C-4150J. The automatic ambient pressure equalization valve self-regulates for different altitudes meeting military standards MIL-STD-648C and IP67.  It is resistent to UV, solvents, corrosion, fungus and impact dama..

The 3I-4217-7G-PS Pro Series Double Bow/Rifle Case is injection molded from ultra high-strength polypropylene co-polymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design, meeting military standard MIL-C-4150J. The automatic ambient pressure equalization valve self-regulates for different altitudes meeting military standards MIL-STD-648C and IP67.  It is resistant to UV, solvents, corrosion, fungus and impa..