|
|
Two straps and four screws provide added gripping power for these lightweight, all-aluminum rings. Thumbscrews allow for quick detach.
T/O = Tip Off for factory grooves in receiver, Sil = Silver
|
|
|
|
Get the best of both worlds with a steel strap for added strength and an aluminum saddle for reduced weight. These quick detach rings are the Original Weaver style Rings.
|
|
|
|
Try these to get the ideal
eye relief. They let you position your scope forward of rearward.
|
|
|
|
Mount your favorite sight device with ease using the Weaver® No Gunsmith mounts. The multi slot bases allow you to mount a variety of optics including scopes, red dots and laser sights while obtaining the optimum eye relief. The low profile, form fitting design allows you to shoot in your natural position without "peeking." Strong and lightweight, made of tough polymer composite material, these mounts will operate in temperatures of -40°F to 150°F.
Remington = Remington 870, 1100, 1187, 12 and 20 Gauge
Mossberg = Mossberg 500, 835, 12 Gauge Only
|
|
|
|
Transform your bird gun into a deer hunting firearm along with the change in seasons. Two thumb screws put your scope on or take it off. Our see-under systems let you use your scope or bead.
|
|
|
|
In the tactical world, performance is mandatory—there is no compromise. Whether it's intense training or real-life action, you need your zero to stay true. These aircraft-grade aluminum tactical rings feature six points of contact for maximum security and are designed to withstand the most grueling environments imaginable. If you demand the most from your tactical scope, demand Weaver.
|
|
|
|
Get the legendary holding power of Weaver® for your in-line muzzleloader rifles. This
ring and base set features lightweight aircraft-grade aluminum for strength and weight reduction.
2-piece permits windage adjustments, while the 1-piece is designed to
eliminate misalignment of rings. Easy mounting and perfect for 1" scopes
TC En/Om = Thompson Center Encore/Omega
C/T/Rg = CVA/Traditions/Remington Genesis
C/T/Win = CVA/Traditions/Winchester In-Line
|
|
|
|
The Angle-Loc windage-adjustable scope mount system is the most significant improvement to the traditional Weaver-Style mount in many years. Adjust your scope side to side for precise alignment to your receiver. All components are made of heat-treated nickel-steel for rock-solid durability. Will amount on any Weaver Style or Picatinny base.
|
|
|
|
• STD 2-Piece bases fit right- and left-hand
actions
• STD rings are made to match up with STD 1-Piece 2-Piece bases
• Forward part of the base accepts a dovetail ring, locking it solidly
into position
• Long Range STD™ mounts provide a 1/4 degree (15-MOA) slope of
built-in elevation
• STD 2-Piece bases offer maximum accessibility to the breech area
of your rifle
• Five different ring heights are available for STD bases
• Rear ring is secured by windage adjustment screws
• Versatile, available for many different rifles
• Machined steel construction
• Low = .65", Med = .77", High = .90", X-high = 1.0"
|
|
|
|
• Remove and reattach a scope using our QR mount and still return
to within half an inch of the original point-of-impact on the target
• Turn the lever forward and an eccentric on the lever shaft engages
the base of the ring, pulling it down and forward on the base,
locking it solidly into its “zero” position
• The key is super-close machining tolerances at the heart of the
patented lever mechanism
• The strength of machined steel construction
• Proven in extensive testing
• Low = .65", Med = .77", High = .90", X-high = 1.0"
|
|
|
Leupold STD Bases 1-pc or 2-pc
Leupold One-Piece Bases are true classics. Leupold has models to fit virtually every rifle in existence, making them one of the most versatile mounts you can find. The front part of the base accepts a dovetail ring, locking it solidly into position. And the rear ring is secured by windage adjustment
screws. If you're looking for maximum accessibility to the magazine or breech area of your rifle, Two-Piece Bases are worth a look. Fluted for a custom look, these bases are also ideal if you're after greater flexibility when it comes to mounting options for your bolt-action rifle. Reversible bases are available for each action, which accommodate an impressive variety of scopes and action lengths. Two-Piece Bases fit right-hand and left-hand actions.
Leupold
STD Bases $18.99-$19.99
|
|
|
Leupold QR Bases 1-pc or 2-pc
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its "zero" position. You can easily remove a scope for cleaning or change scopes.
Leupold QR Bases
$52.99-$84.99
|
|
|
|
Our precision-built steel bases are machined to tight tolerances for a custom fit. A square-cut notch mates to the sturdy cross bolt in every Weaver® top mount Ring. Custom-hardened fastening screws included.
|
|
|
|
Allows .22 Tip-Off Mounts to be used on non-factory dovetailed rifles. Provide sure, tight fit for the ultimate in reliability.
|
|
